24/7 Emergency  Repair Service.

Dishwasher doesn’t function: 15 Common Dishwasher Problems You May Face

dishwasher repair

A dishwasher isn’t fully indestructible because everything eventually wears out. Thankfully, everything can be fixed, allowing you to extend the life of your equipment.

The dishwasher is one of the most regularly used household equipment. What else is capable of handling a large number of dishes in a short amount of time? Nevertheless, the dishwasher problems with the functioning still occur. Some typical issues are when the system breaks down to start, does not drain or take water, leaves spots on the dishes, or the cycle lasts too long or finishes washing too soon.

Atlas Home Experts will answer the most popular questions regarding the “dishwasher won’t work” issues and help you to solve them with house methods. We’re a company with extensive experience on the market, encountered a slew of issues. If your problem isn’t listed, please contact us, and we’ll do our utmost to help you!

Dishwasher problems and what to do with them

A dishwasher works by flooding the lowest section of the tub, which combines with the detergent and is pushed via spinning spray arms onto the dishes. The cycle frequently perpetuates itself. The temperature is raised to 140 to 160 degrees F by a heating element near the bottom. After the wash and rinse cycles are done, the element aids in drying the dishes.

Dishwashers are much less expensive than traditional hand-washing, and their handy, energy-saving features save you and your family a lot of time and work. However, they, like any other appliance, aren’t flawless. The dishwasher needs to be cleaned regularly to stay in good working order. Without routine maintenance, your appliance may begin to produce filthy, still-dirty plates and glasses, emit a foul stench, or even spill all over your kitchen floor.

This article separates the dishwasher job matters into three parts: the overall malfunctioning, the problems with cleaning, and the issues with elements. Let us assist you in understanding the most prevalent difficulties and how to tackle them.

Please make sure that you follow these instructions exactly. Contact us if you have any problems doing this maintenance, and as always, consult your user manual for specific instructions for your specific device.

overall malfunctioning

The overall malfunctioning

  1. My dishwasher is struggling to start working.

Examine batteries and circuit breakers for any signs of damaged fuses. It’s also a smart option to double-check that the dishwasher is correctly connected and that the cabling isn’t damaged. A defective door latch might be the cause of a dishwasher that won’t start. If your latch is working properly, look at the clock or motor controller, particularly if your drainage pump engine isn’t turning on.

  1. My dishwasher is not draining.

Take a glance at the control valve plate in the drain sump. If it isn’t working correctly, it should be replaced. Consider replacing the drain pump or engine, as well as inspecting the drain valve and solenoid for clogs.

  1. My dishwasher is leaking.

Inspect the drain pipe and the water heater gaskets for splits and other defects. Another issue that a faulty pump or pump seal might create is a leaky dishwasher. Probably replace the seal or the entire pump. Before you do so, inspect the door seal. Renew it if it has grown brittle or does not appear to be closing correctly to see if you can achieve a better fit.

  1. My dishwasher is not filling the water/is filling too much water.

Start by looking at the inlet pressure valve and see whether it needs to be replaced. Check the flotation and the button as well. They may be clogged with junk, preventing them from operating correctly. Examine the supply of hot water stop nozzles under your counter to make sure the flow is turned on. A defective float control, a clock stuck on fill, or a blocked open water inlet valve might be the cause of a dishwasher that won’t stop filling.

  1. My dishwasher is stinking to high heaven.

Search for leftover food and oil if you notice aromas after your machine has finished. The strainer screen, the jets in the sprayer arms, and the bottom edge of the door will all contain this. Remove any unwanted particles and oil from these areas, then run a full rotation with no plates. Add a dishwashing cleaner or sanitizer to the mix. When starting your cycle, make sure to wipe the utensils to remove any oil or big food particles.

  1. My dishwasher is making so much noise while working.

It’s possible that the pump is broken or that the wash arm gasket or bearing band needs to be replaced. Your spray nozzles aren’t spinning smoothly and may be striking shelves or plates, necessitating their replacement.

  1. My dishwasher cycle is taking too long/is not finishing the dishes.

The clock engine, thermostat, or heat source are most inclined to blame. A multimeter should be used to double-check everything.

  1. My dishwasher is not applying any detergent.

The reservoir can be blocked with caked-on detergent and may not discharge washing powder correctly. Reinstall it or wash it and ensure it unlocks smoothly for you.

  1. My dishwasher is cracking.

A dishwasher with a fractured intestinal wall will need to be changed in most households since it can spill water and detergent into machine systems, posing a threat.

  1. My dishwasher is not heating the water.

Keep a thermometer under the faucet for 2 minutes if you believe the water isn’t boiling adequately. Make sure the water is a minimum of 140 degrees Fahrenheit. If the water isn’t heated sufficiently, increase the temperature on your hot water system.

cleaning dishwasher

The problems with cleaning

  1. My dishwasher is not doing its utmost to clean the dishes.

Inspect the strain panel, nozzle arms, and door seal for bits of food, oil, and other dirt. Run a cleaning cycle cleanser with no crockery. If you have hard water, the buildup has to be removed. Examine the spray arm for impediments and make sure it can wander independently. Renew it if it is worn. Another issue might be a missing or worn top outflow housing seal that has to be changed. You require a higher-quality detergent.

  1. My dishwasher is producing cloudy glasses/is leaving a film on glasses.

Hard water development is the most common cause of white or foggy glass. It refers to water that contains microscopic particles that drop out of heated water and adhere to other surfaces. Use a specific hard water cleanser or a larger amount of conventional wash. 

  1. My dishwasher is producing spotty dishes with residue.

If your dishes have stains, attempt using a wash assist. Water will not cling to dish sides.

  1. My dishwasher is not drying the dishes.

The heater is the cause of a machine that won’t finish plates. Test the heat exchanger with a multimeter to ensure it is operating correctly.

The issues with elements and parts 

  1. My dishwasher’s door is not properly closing.

Examine the door latch for corrosion, as well as the automatic control, if this isn’t functioning effectively. Suggest switching the lock or hook to ensure effective operation.

  1. My dishwasher’s racks are not rolling out.

If your racks aren’t rolling adequately, look for deterioration to the rollers. If required, you may obtain substitutes or simply adjust the rack’s position.

  1. My dishwasher’s buttons are not working.

If the buttons aren’t working, there might be an electrical or mechanical problem. Bear in mind that one potential problem is that the door is not securely shutting.

  1. My dishwasher’s lights are blazing.

If the service’s indicators have started to flicker, there is a concern. In the user’s manual, you may learn about all of the most frequent dishwashing problems and how to remedy them. These sorts of warning systems are built into current components to make discovering and resolving problems easier.

issues with dishwasher

Choose Atlas Home Experts

Atlas Appliances Repair is a residential and commercial appliance repair family business in Texas. We’ve dealt with a wide range of issues, so you can be certain that any faults in the operation of your kitchen equipment will be completely eliminated.

At Atlas Appliances Repair, we think that fixing your home’s appliances is merely the beginning of the job. All laundry and kitchen equipment are repaired and installed by our business. We also repair small appliances such as microwave ovens, ice makers, garbage disposals, and range hoods, in addition to all gas and electric ovens, microwaves, washers, dryers, ranges, refrigerators, dishwashers, and trash compactors.

At our appliance repair, we try to provide outstanding service to all of our clients by going above and beyond to ensure that their home is properly protected. 


Any method wears down with time owing to the repetition of the same motions. Prophylaxis is recommended to avert repeated breakdowns. We propose 2-4 preventative maintenance visits each year if the water comes from a well. If the water comes from the tap, 1-2 prophylaxis per year should be enough. 

If you still have an issue with your equipment breaking down or not operating, there are a few simple fixes you may try. They don’t necessitate any major acts or exceptional abilities. If you are still unable to handle self-repair, we highly advise you to call the service to avoid negative repercussions. Our experts will do all that is possible to extend the life of your expensive equipment.

Filter By Categories

Our Recent Post

Follow Our Social Media

Scroll to Top
Call Now